| PERFORMANCE |
| Up
to 20,000 sq ft/hr subject to conditions.2 |
| AERATION
SWATHE |
| 48"
(1220mm) effective |
| TINES |
24
x 2" apart using Standard Tine Holders
48 x 1" apart using Quadratine Holders |
| AERATION
DEPTHS |
| 0
- 3 1/4" (0-80mm) fully adjustable. |
| HOLE
PATTERNS ON TURF |
1"
x 1", 1" x 2", 2" x 2", 2" x 3",
2" x 4", 2" x 5"
(25x25, 25x50, 50x50, 50x75, 50x100, 50x125mm) |
| TINE
SIZES |
| Hollow |
1/4",
3/8", 1/2", 5/8", 3/4" |
| Solid |
3/8",
1/2", 5/8" |
| Quadratine |
1/4",
5/16" |
| Quadraspike |
3/8" |
| Slicing
Blades |
4" x
2" x 1/8" (90 x 45x 3mm) |
| DIMENSIONS |
| Height |
30"
(765mm) |
| Width |
55"
(1400mm) |
| Depth |
25"
(630mm) |
| Weight |
647lb (295Kg) |
| Shipping
Weight |
800lb (360Kg) |
| Crate |
H41.5 x W63.5
x D30.25" = 46 cu ft
(1055 x 1610 x 770 mm) = 1.3 M cubed |
| CONSTRUCTION |
| FRAME |
Solid and
tubular heavy duty steel. Rust inhibiting paint process. |
| COVERS |
Fibreglass
(GRP) |
| CRADLE |
Tubular Steel
- for safe storage |
| ACCESSORIES |
| Windrow |
Pt# CAB500A |
| Core
Collector |
Pt# CAD510A |
| Tine &
Blade Holders |
See Accessories |
| LUBRICATION
- Model CA72 |
| Gearbox
Output Shaft, tine Leg and Crankshaft |
| Main
bearings: Grease* |
PT#LCX007 |
| Gearbox: Oil
(0.8US Quart/Litre) |
PT#LCX005 |
| Chains: Spray
Lubricant |
PT#LCX003 |
| LUBRICATION
- Model CA71 (Autolube) |
| Crankshaft
Autolube |
PT#LCX002 or
PT#LCX005 |
| Gearbox: Oil
(0.8US Quart/Litre) |
PT#LCX005 |
Bearings:
Grease
Note: Grease PTXLCX007 replaces PT#LCX004 |
PT#LCX007 |
| Chains: Spray
Lubricant |
PT#LCX003 |
| TRACTOR
REQUIREMENTS |
25-60HP
WIDE, FLAT TURF TYRES
4 WHEEL DRIVE preferred
MANUAL Transmission preferred
220lb - 100Kg Front Counter Weights minimum.
Note: R.O.P.S. (Roll Over Protection System),
O.D.D. (Operator Detection Device) and Seat
Belt Must be fitted to tractor & used at all times. |
| TRACTOR
PTO rpm OPTIONS |
| 540
only, use CoreMaster *12 - Sprocket Ratio 26:22 |
| Multiple,
use CoreMaster *12 - Sprocket Ratio 20:22 |
| TRACTOR
HITCH |
| Category
One, 3-Point Hitch complete with single acting "free
floating" arms. |
| TRACTOR
PTO SHAFT |
1
3/8" 6 spline output and input shafts.
+/- 15 degrees maximum shaft deviation from horizontal when
operating.
PTO Shaft supplied with Safety Shields.
Cut PTO Shaft to correct length before use. Never operate PTO Shaft
when Tines are raised above ground level. |
